Curatronic

Very High Energy Coil Type B

An 8-inch square coil rated at 1,000 gauss for the Curatron XPSE, 2000PC, and 3D systems. A control unit is required.

$950.00

About the Very High Energy Coil Type B

The Very High Energy Coil Type B is an 8-inch square applicator for the Curatron system range. Its compact size suits smaller areas such as a knee, elbow, hand, or foot. The coil does not operate on its own.

Output reaches 100,000 microtesla (1,000 gauss). That makes it the stronger of the two Very High Energy coils, since Type A is rated at 700 gauss. Both measure 8 inches square.

Three Curatron systems accept this coil. Curatronic lists it as an optional applicator for the XPSE, the 2000PC, and the 3D. It is not compatible with the Flash models.

A Curatron control unit supplies the programs, the session timing, and the power. The coil connects to it by cable. Curatronic cover applicators for six months.

Pulsed electromagnetic field devices are not suitable for everyone. Read the Curatron manual before use, particularly if you have a pacemaker or any implanted electronic device.

Specifications

BrandCuratron
TypeOptional applicator
Dimensions8 in x 8 in (20 cm x 20 cm)
Field Strength100,000 μT (1,000 gauss)
CompatibilityCuratron XPSE, 2000PC, 3D
Not CompatibleFlash models
Warranty6 months