Earthing Universal Band
$119.99
Description
This redesigned version of the classic Earthing Foot Band is sure to be a new favorite! The adjustable elastic can fit around most feet, as well as the wrist or arm. The Earthing Universal Bands are ideal for travel, providing grounding anywhere a grounded outlet is available.
What's Included
1 Pack
– 1 Earthing Universal Band (3.5″ x 2.25″ W 12.25″ L)
– 1 Earthing Coil Cord (Length: 15ft)
– 1 U.S. Safety Adapter
– 1 U.S. Outlet Checker
2 Pack
– 2 Earthing Universal Bands (3.5″ x 2.25″ W 12.25″ L)
– 2 Earthing Coil Cords (Length: 15ft)
– 1 U.S. Safety Adapter
– 1 U.S. Outlet Checker
How to Use
STEP 1: Test your wall outlet with the included Outlet Checker to ensure it’s grounded.
Grounded – Two amber lights illuminated. You are ready to move on to step 2.
Not Grounded – Any other light combination. If this is the case, try testing other outlets. If none of them are grounded, then you will need to purchase a Ground Rod to use with your product.
STEP 2: Push the included Safety Adapter into your grounded wall outlet or into the surge protector that’s plugged into the grounded wall outlet.
STEP 3: Firmly push one end of the Coil Cord into the Safety Adapter. Snap the other end of the Coil Cord onto the connector tab of the Universal Band.
STEP 4: Wrap the Universal Band where you’d like to use it on your arm or leg and velcro it closed. You’re grounded! Repeat this process with the second Band if you’d like to use two at the same time on separate body parts.
Materials & Care Instructions
MATERIALS
Dimensions: 3.5 x 2.25in W | 12.25″ L
The Earthing Universal Bands feature a center made from our proprietary carbon-based grounding material, the culmination of two decades of research and development by Clint Ober. Carbon, the second most abundant element in the human body, effortlessly conducts Earth’s electrons. The strap of the Universal Band is made from a rubber, nylon, and polyester blend for comfort and durability.
CARE INSTRUCTIONS
Do:
– Wipe down the Bands using a non-corrosive cleaner like soap and water on a damp sponge.
– Air dry before rolling the Bands back up.
Do Not:
– Use bleach, chlorine, or harsh chemicals to clean the Bands.
– Do not apply lotion, creams, or body oil to your skin before touching the Bands, as these can oxidize and damage conductivity over time.
Information
Product Specifications
| M-Field Frequency Range | +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 mG – 25 mG) (1 nT – 2500 nT) Reduced tolerance up to 100 mG (10,000 nT) per axis or 173 mG 3D (17,300 nT) |
| E-Field Frequency Range | +/-1 dB @ 16.7 Hz, 50 Hz – 400 kHz (0.01 V/m – 10 V/m) +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 V/m – ~45 V/m) Reduced tolerance up to 200 V/m |
| Body Voltage Frequency Range | 50Hz – 120 kHz |
| Body Voltage Input Impedance | 10 Mohm + <100 pF |
| Number of Axis E / Mag | 1 Electric (Y Axis) / 3 Magnetic (X, Y, Z Axis) |
| Magnetic Field Strength Range | 0.01 mG – 100 mG (Frequency Dependant) 1 Axis 0.01mG-173mG 3D, 3 Axis |
| Electric Field Strength Range | 0.01 V/m – 200 V/m (Frequency Dependant) |
| Body Voltage Strength Range | 1 mV – 12,000 mV |
| Audio Output | Geiger counter effect. Varying Clicks with Power |
| Display Type | OLED Display |
| Battery Type | AA (x2) |
| Battery Life | Approx. 18 hours |
| Low Battery Detection | Display on OLED |
| Filters | 16.7 Hz Band Pass, Full >50 Hz (without 16.7 Hz), > 60 Hz High Pass and >2 kHz High Pass |
| I/O Connectors | USB-C Power, 3.5mm (1/8″) Port |
The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.