Earthing Socks REFILL (Accessories Not Included)
$49.99
Description
Earthing Grounded Socks only, does not include accessories.
Grounding so much you need a new pair of Earthing Socks? We got you covered! This replacement set of socks will work with all your Earthing accessories from your original purchase.
What's Included
2 Earthing Socks with a conductive snap on each sock
Please Note: This page is for Earthing Grounded Socks only, and does not include accessories. Visit the Earthing Grounded Sock Kit page for the full kit.
How to Use
TO USE THE GROUNDED SOCKS WITH A GROUNDED WALL OUTLET
STEP 1: Get the accessories you already have at home. (You will need the Outlet Checker, one Safety Adapter, and two Coil Cords.)
STEP 2: Test the wall outlet with your Outlet Checker. Push your Safety Adapter into your grounded wall outlet or into the surge protector that’s plugged into the grounded wall outlet.
STEP 3: Firmly push one end of the first Coil Cord into the Safety Adapter. Firmly push one end of the second Coil Cord into the Safety Adapter. Put the Earthing Grounded Socks on your feet.
STEP 4: Snap the other end of the first Coil Coil onto one sock, and snap the other end of the second Coil Cord onto the second sock. You’re now grounding! Please remember to disconnect the Coil Cords before walking.
———-
TO USE THE GROUNDED SOCKS WITH ANOTHER GROUNDED EARTHING PRODUCT
STEP 1: Put on your Earthing Grounded Socks
STEP 2: Place your feet on any Earthing product that is properly grounded to a wall outlet, and you are now grounded!
Materials & Care Instructions
MATERIALS
Dimensions: One size fits most.12.5in long top to tip. Top opening width is 3.5in.
Fabric: 80-85% Nylon, 15-20% Silver Fiber (naturally antibacterial and antimicrobial.)
CARE INSTRUCTIONS
– HAND WASH as needed with mild soap and water. You don’t need to wash these socks as often as regular socks due to their naturally antimicrobial properties.
– Never use bleach, whitening detergents, oxi-detergents, or soaps with essential oils.
– Air dry only.
– Wait one hour after applying lotions or oils before wearing the Socks.
Information
Product Specifications
| M-Field Frequency Range | +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 mG – 25 mG) (1 nT – 2500 nT) Reduced tolerance up to 100 mG (10,000 nT) per axis or 173 mG 3D (17,300 nT) |
| E-Field Frequency Range | +/-1 dB @ 16.7 Hz, 50 Hz – 400 kHz (0.01 V/m – 10 V/m) +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 V/m – ~45 V/m) Reduced tolerance up to 200 V/m |
| Body Voltage Frequency Range | 50Hz – 120 kHz |
| Body Voltage Input Impedance | 10 Mohm + <100 pF |
| Number of Axis E / Mag | 1 Electric (Y Axis) / 3 Magnetic (X, Y, Z Axis) |
| Magnetic Field Strength Range | 0.01 mG – 100 mG (Frequency Dependant) 1 Axis 0.01mG-173mG 3D, 3 Axis |
| Electric Field Strength Range | 0.01 V/m – 200 V/m (Frequency Dependant) |
| Body Voltage Strength Range | 1 mV – 12,000 mV |
| Audio Output | Geiger counter effect. Varying Clicks with Power |
| Display Type | OLED Display |
| Battery Type | AA (x2) |
| Battery Life | Approx. 18 hours |
| Low Battery Detection | Display on OLED |
| Filters | 16.7 Hz Band Pass, Full >50 Hz (without 16.7 Hz), > 60 Hz High Pass and >2 kHz High Pass |
| I/O Connectors | USB-C Power, 3.5mm (1/8″) Port |
The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.