Earthing Socks
$129.99
Description
Wear the Earthing Grounded Socks while sitting or lying down, relaxing, working, or sleeping. There are two different methods for using these socks: Connect the Coil Cords into a grounded wall outlet or touch another grounded product. These grounding socks are a great way to be grounded while keeping your feet warm!
What's Included
– 2 Earthing Grounded Socks with a conductive snap on each sock
– 2 Coil Cords (Length: 15ft each)
– 1 U.S. Safety Adapter
– 1 U.S. Outlet Checker
How to Use
TO USE THE GROUNDED SOCKS WITH A GROUNDED WALL OUTLET
STEP 1: Test your wall outlet with the included Outlet Checker to ensure it’s grounded.
Grounded – Two amber lights illuminated. You are ready to move on to step 2.
Not Grounded – Any other light combination. If this is the case, try testing other outlets. If none of them are grounded, then you will need to purchase a Ground Rod to use with your product.
STEP 2: Push the included Safety Adapter into your grounded wall outlet or into the surge protector that’s plugged into the grounded wall outlet.
STEP 3: Firmly push one end of the first Coil Cord into the Safety Adapter. Firmly push one end of the second Coil Cord into the Safety Adapter. Put the Earthing Grounded Socks on your feet.
STEP 4: Snap the other end of the first Coil Cord onto one sock, and snap the other end of the second Coil Cord onto the second sock. You’re now grounded! Please remember to disconnect the Coil Cords before walking.
———
TO USE THE GROUNDED SOCKS WITH ANOTHER GROUNDED EARTHING PRODUCT
STEP 1: Put on your Earthing Grounded Socks
STEP 2: Place your feet on any Earthing product that is properly grounded to a wall outlet, and you are now grounded!
Materials & Care Instructions
MATERIALS
Dimensions: One size fits most.12.5in long top to tip. Top opening width is 3.5in.
Fabric: 80-85% Nylon, 15-20% Silver Fiber (naturally antibacterial and antimicrobial).
CARE INSTRUCTIONS
– HAND WASH as needed with mild soap and water. You don’t need to wash these socks as often as regular socks due to their naturally antimicrobial properties.
– Never use bleach, whitening detergents, oxi-detergents, or soaps with essential oils.
– Air dry only.
– Wait one hour after applying lotions or oils before wearing the Socks.
Information
Product Specifications
| M-Field Frequency Range | +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 mG – 25 mG) (1 nT – 2500 nT) Reduced tolerance up to 100 mG (10,000 nT) per axis or 173 mG 3D (17,300 nT) |
| E-Field Frequency Range | +/-1 dB @ 16.7 Hz, 50 Hz – 400 kHz (0.01 V/m – 10 V/m) +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 V/m – ~45 V/m) Reduced tolerance up to 200 V/m |
| Body Voltage Frequency Range | 50Hz – 120 kHz |
| Body Voltage Input Impedance | 10 Mohm + <100 pF |
| Number of Axis E / Mag | 1 Electric (Y Axis) / 3 Magnetic (X, Y, Z Axis) |
| Magnetic Field Strength Range | 0.01 mG – 100 mG (Frequency Dependant) 1 Axis 0.01mG-173mG 3D, 3 Axis |
| Electric Field Strength Range | 0.01 V/m – 200 V/m (Frequency Dependant) |
| Body Voltage Strength Range | 1 mV – 12,000 mV |
| Audio Output | Geiger counter effect. Varying Clicks with Power |
| Display Type | OLED Display |
| Battery Type | AA (x2) |
| Battery Life | Approx. 18 hours |
| Low Battery Detection | Display on OLED |
| Filters | 16.7 Hz Band Pass, Full >50 Hz (without 16.7 Hz), > 60 Hz High Pass and >2 kHz High Pass |
| I/O Connectors | USB-C Power, 3.5mm (1/8″) Port |
The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.