Earthing Chair Mat
(2 Pack)

$149.99

Description

The Earthing® Chair Mat connects you to the earth’s energy through the grounded port of your wall outlet while you sit and relax.

– 2 Earthing Chair Mats (Dimensions: Top: 11 x 12in | Bottom: 12 x 12in)
– 2 Coil Cords (Length: 15ft each)
– 2 U.S. Safety Adapters
– 1 U.S. Outlet Checker

STEP 1: Test your wall outlet with the included Outlet Checker to ensure it’s grounded.

Grounded – Two amber lights illuminated. You are ready to move on to step 2.

Not Grounded – Any other light combination. If this is the case, try testing other outlets. If none of them are grounded, then you will need to purchase a Ground Rod to use with your product.

STEP 2: Push the included Safety Adapter into your grounded wall outlet or into the surge protector that’s plugged into the grounded wall outlet.

STEP 3: Firmly push one end of the Coil Cord into the Safety Adapter. Place the Chair Mat where you’d like to use it. Snap the other end of the Coil Cord onto the connector tab of the Chair Mat.

STEP 4: Sit on the Floor Mat and you’re grounded! For optimal effectiveness, direct contact or wearing thin layers of natural material for clothing, such as cotton or bamboo, is best.

Dimensions: Top: 11 x 12in | Bottom: 12 x 12in

Material: Earthing’s proprietary carbon-based grounding material is the result of over two decades of research and development by Clint Ober. Carbon, the second most abundant element in the human body, effortlessly conducts the Earth’s electrons. Earthing’s unique grounding material is vegan, eco-friendly, durable, 100% conductive, and easy to clean.

This Chair Mat features a black backing, unlike our previous Model, which had a blue backing.


CARE INSTRUCTIONS
Do:
– Wipe down the Earthing Chair Mat using a non-corrosive cleaner like soap and water on a damp sponge.

– Air dry before rolling the Earthing Chair Mat back up.

Do Not:
– Use bleach, chlorine, or harsh chemicals to clean the Chair Mat.

– Do not apply lotion, creams, or body oil to your skin before touching the Chair Mat as these can oxidize and damage conductivity over time.

Information
Product Specifications
M-Field Frequency Range+/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 mG – 25 mG) (1 nT – 2500 nT) Reduced tolerance up to 100 mG (10,000 nT) per axis or 173 mG 3D (17,300 nT)
E-Field Frequency Range+/-1 dB @ 16.7 Hz, 50 Hz – 400 kHz (0.01 V/m – 10 V/m) +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 V/m – ~45 V/m) Reduced tolerance up to 200 V/m
Body Voltage Frequency Range50Hz – 120 kHz
Body Voltage Input Impedance10 Mohm + <100 pF
Number of Axis E / Mag1 Electric (Y Axis) / 3 Magnetic (X, Y, Z Axis)
Magnetic Field Strength Range0.01 mG – 100 mG (Frequency Dependant) 1 Axis 0.01mG-173mG 3D, 3 Axis
Electric Field Strength Range0.01 V/m – 200 V/m (Frequency Dependant)
Body Voltage Strength Range1 mV – 12,000 mV
Audio OutputGeiger counter effect. Varying Clicks with Power
Display TypeOLED Display
Battery TypeAA (x2)
Battery LifeApprox. 18 hours
Low Battery DetectionDisplay on OLED
Filters16.7 Hz Band Pass, Full >50 Hz (without 16.7 Hz), > 60 Hz High Pass and >2 kHz High Pass
I/O ConnectorsUSB-C Power, 3.5mm (1/8″) Port

The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.