Gigahertz Solutions - HF38B RF Meter
$501.00
Description
Gigahertz Solutions HF38B RF Meter
Intermediate RF Analyzer / RF Detector
Measuring Range (700 MHz – 3.3 GHz) with audio signal analysis – 10 times more sensitive than the HF35C.
This meter also includes Peak Hold Settings, Peak Settings, and Average Settings, and it can measure higher power signals.
Experience a meter with Peak Hold features that allow for accurate assessment of sources that emit intense, quick bursts of RF energy, such as smart meters. It remains easy to use and retains the audio source identification features of the HF35C.
“Know for sure” what RF levels you are being exposed to – own a Gigahertz Solutions HF38B RF Meter.
Professional Level Upgrades
- Audio Identification: The meter’s audio tone replicates the signal patterns and intensity of measured RF emissions and aids in source identification
- Peak Hold, Peak and Average Settings: While measurements taken on the Average Value setting provide a basic sense of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The PeakValue is regarded as the measurement critical to assessing potential biological effects.
- Increased frequency response from up to 3.3 GHz (700 MHz to 3.3 GHz)
Features
Advanced Features:
- 100 Times the measurement sensitivity of a Beginner Level Meter (HF32D)
- 10 Times the measurement sensitivity of an Intermediate Level Meter (HF35C)
- Offers a Coarse measurement range, a Medium measurement range, and a Fine measurement range
- Coarse range covers stronger readings of 0.01 – 19.99 mW/m²
- Increased sensitivity translates into the detection of sources otherwise missed by our competitor’s RF detection equipment
Additional Features:
- Antenna: Directional Logarithmic Periodic “LogPer” 700 MHz – 3.3 GHz 45º
- LCD Display (3.5 digits): Easy to read 3.5-digit display
- Accuracy / Linearity Deviation: +/– 6dB
- Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
- Signal Detection Type: Peak Hold, Peak, Average, Full signal – Analog plus Digital (pulsed)
- Power Supply: 9 Volt alkaline battery included
- Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
- Auto Power Off: Saves on battery use – will auto–power off after 40 minutes of continuous EMF testing
- Operating Time: Alkaline battery provides up to 6 – 7 hrs continuous EMF testing
- Measuring Ranges: 0.01 –19.99 µW/m² // 0.1 – 199 µW/m² // 0.01 – 19.99 mW/m². Maximum display resolution is 1,999,000 µW/m², which requires the external DG20 Attenuator
Also Offers Features of The HF35C:
- Easy to operate, power the unit on, select measurement settings, and record on the LCD
- Displayed readings as you walk the meter through your living space
- Accessorized with a sturdy Logarithmic–Periodic Antenna, designed for directional detection of RF waves. Readings increase when the meter gets closer to or points in the direction of offending sources.
- Detects both analog signals and pulsed digital signals
- Detects RF radiation generated by cellular phones and cordless phones (Digital or DECT);
- Microwave ovens; wireless communication devices such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games, smart meters, and cell phone towers (GSM, UMTS, 2G, 3G,4G)
Inclusions
- Gigahertz Solutions HF38B Radio Frequency Meter
- Logarithmic Periodic Antenna 700 MHz – 3.3 GHz vertically polarized
- Users’ Guide
- 2 Year Warranty Certificate
- 9 V Alkaline Battery
Calibration
During the manufacturing process, strict calibration procedures are followed using only high-end, calibrated measurement instruments. This guarantees that every HF35C meter made by Gigahertz has been individually calibrated to a traceable standard.
Videos
Manuals
Product Specification
Frequency Range of Meter:
700 MHz to 3.3 GHz
Measurement Ranges:
Fine: 0.01 – 19.99 µW/m2 – Resolution 70 dB
Medium: 0.1 – 199.9 µW/m2 – Resolution – 60 dB
Coarse: 0.01 – 19.99 mW/m2 – Resolution – 50 dB
Antenna:
True Logarithmic Periodic Antenna 700 Mhz – 3.3 Ghz vertically polarized
Signal Evaluation:
True peak and average (Peak hold feature)
Accuracy:
+ / – 6 dB
Linearity Deviation:
+ / – 6 dB
Rollover:
+ / – 9 digits
Dimensions:
71 x 225 x 31 mm (W x L x H) approx 2–3/4 x 9 x 1.25 inches
Weight:
Approx. 250 grams
Material of the Case:
Plastic
Operating Time:
Up to 6–7 hours – varies according to the mode of operation
Product Specifications
| Frequency Range of Meter | 400 MHz to 7.2 GHz (will detect signals from 200 MHz to 8 GHz) |
| Accuracy | +/- 6dB – 3rd Party Certified – testing report attached |
| Measurement Range | 0.001 µW/m² to 3,180,000 µW/m² (Linear response between 0.1µW/m² and 1,000,000µW/m²) |
| Sampling Rate | 200 kHz |
| Response Time | <5 μs |
| LED Range @ 2.4 GHz–Green (Flashing) | <1 µW/m² |
| LED Range @ 2.4 GHz–Green | 10 µW/m² |
| LED Range @ 2.4 GHz–Yellow | 10 – 100 µW/m² |
| LED Range @ 2.4 GHz–Orange | 100 – 1,000 µW/m² |
| LED Range @ 2.4 GHz–Red | 1,000 – 10,000 µW/m² |
| LED Range @ 2.4 GHz–Red (Slow Flashing) | 10,000 – 100,000 μW/m² |
| LED Range @ 2.4 GHz–Red (Fast Flashing) | >100,000 μW/m² |
The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.