Earthing Patches (90 Pack)
$139.99
Description
Earthing® Patches offer a convenient way to stay grounded by connecting specific points on your body to the Earth’s natural energy. For general use, we recommend applying them to the palms of your hands or the soles of your feet, as these are among the most conductive areas.
The patches are adhesive and designed for one-time use. Use them while stretching, working, relaxing, or sleeping—wherever grounding fits into your daily routine.
What's Included
– 3 Bags of Earthing Patches (90 Patches total)
– 2 Earthing Coil Cords (Length: 15ft each, black color)
– 1 U.S. Outlet Checker
– 1 U.S. Safety Adapter
How to Use
STEP 1: Test your wall outlet with the included Outlet Checker to ensure it’s grounded.
Grounded – Two amber lights illuminated. You are ready to move on to step 2.
Not Grounded – Any other light combination. If this is the case, try testing other outlets. If none of them are grounded, then you will need to purchase a Ground Rod to use with your product.
STEP 2: Push the included Safety Adapter into your grounded wall outlet or into the surge protector that’s plugged into the grounded wall outlet. Firmly push one end of the Coil Cord into the Safety Adapter.
STEP 3: Peel off a Patch from the plastic backing. Apply it to the body part you wish to ground.
STEP 4: Snap the other end of the Coil Cord onto the connector tab on the Patch. You’re now grounded! Repeat this process with an additional Patch if you’d like to use two at the same time on separate body parts.
Materials & Care Instructions
Do:
– Apply the Patch to clean, dry skin.
– Push the Patch firmly onto the skin to make sure the gel center has complete contact with your skin.
– Discard the Patch in your trash receptacle when you’ve completed your grounding time, as they are one-time use.
Do Not:
– Apply lotion, creams, or body oil to your skin before applying a Patch.
– Apply to areas of the body with a lot of hair on them.
Information
Product Specifications
| M-Field Frequency Range | +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 mG – 25 mG) (1 nT – 2500 nT) Reduced tolerance up to 100 mG (10,000 nT) per axis or 173 mG 3D (17,300 nT) |
| E-Field Frequency Range | +/-1 dB @ 16.7 Hz, 50 Hz – 400 kHz (0.01 V/m – 10 V/m) +/- 1 dB @ 16.7 Hz, 50 Hz – 120 kHz (0.01 V/m – ~45 V/m) Reduced tolerance up to 200 V/m |
| Body Voltage Frequency Range | 50Hz – 120 kHz |
| Body Voltage Input Impedance | 10 Mohm + <100 pF |
| Number of Axis E / Mag | 1 Electric (Y Axis) / 3 Magnetic (X, Y, Z Axis) |
| Magnetic Field Strength Range | 0.01 mG – 100 mG (Frequency Dependant) 1 Axis 0.01mG-173mG 3D, 3 Axis |
| Electric Field Strength Range | 0.01 V/m – 200 V/m (Frequency Dependant) |
| Body Voltage Strength Range | 1 mV – 12,000 mV |
| Audio Output | Geiger counter effect. Varying Clicks with Power |
| Display Type | OLED Display |
| Battery Type | AA (x2) |
| Battery Life | Approx. 18 hours |
| Low Battery Detection | Display on OLED |
| Filters | 16.7 Hz Band Pass, Full >50 Hz (without 16.7 Hz), > 60 Hz High Pass and >2 kHz High Pass |
| I/O Connectors | USB-C Power, 3.5mm (1/8″) Port |
The Food and Drug Administration or Therapeutic Goods Association has not evaluated these statements. This product is not intended to diagnose, treat, cure, or prevent any disease.